Repair fast.
Restore for good.
With HAASPHALT®.
HAASPHALT® is a fast-curing, three-component repair mortar based on PMMA for asphalt and concrete.
- Cold application by hand
- Open to traffic after 20–60 minutes
- Workable down to −5 °C
- Frost and de-icing salt resistant
18 kg complete set in a bucket
For municipalities & works depots
- For spots where cold asphalt breaks out again quickly
- Road open again after 20–60 minutes
- No machinery: one worker, one mixer
- Usable all year round, even in frost down to −5 °C
- Resistant to frost and de-icing salt
For dealers
- Palletised: 24 buckets of 18 kg per pallet
- Shelf life of at least 12 months
- Sells in winter, too
- Marketing material for your sales
- Territorial protection by arrangement
Built for short closures
20 to 60 minutes closure time
Fast opening to traffic, even at −5 °C. At 20 °C, the curing time is approx. 30 minutes.
For asphalt and concrete
One material for roadways, parking lots, industrial areas and ramps.
High adhesion
Strong bond to asphalt and concrete, confirmed by high pull-off strength.
Frost and de-icing salt resistant
The repair withstands winter, freeze-thaw cycles and road salt.
Abrasion and impact resistant
High abrasion resistance, high impact strength and flexibility under load.
3-component PMMA system
Mixed and applied by hand. Partial quantities are easy to process, too.
Where HAASPHALT®
is used
- Potholes and spalled areas
- Damaged areas and surface flaking
- Manholes and road fixtures
- Roadways and traffic areas
- Parking lots and driveways
- Industrial and commercial areas
- Ramps and transition areas
Six steps to a finished repair
Prepare and dry the substrate
Firm, load-bearing, clean. Remove dust, oil and loose particles.
Add all
3 components
Shake the resin
canister well
before opening.
Mix for
2 minutes
until uniform
With an
electric mixer,
lump-free.
Place HAASPHALT®
in the damaged area
Process the
finished mixture
immediately.
Spread and
smooth HAASPHALT®
Spread evenly
and
level off.
Open to traffic
after
curing
Usually after 20–60 minutes, depending on temperature.
- Shake the resin canister well.
- Add all of the resin to the filler already in the bucket.
- Pre-mix both components thoroughly and lump-free for at least 2 minutes using an electric mixer.
- Remove the desired partial quantity and place it in a separate mixing bucket.
- Add the required amount of hardener (bag) proportionally and mix in thoroughly for at least 1 minute.
- Process the finished mixture immediately.
What a repair looks like in practice
Real photos of a repair with HAASPHALT®: from the damaged area to the finished surface.
spalling and cracks in the asphalt
being applied
to the substrate
finished within minutes
before grouting
being placed
flush with frame and road
drying with a gas burner
being placed
hall accessible again
Technical data
| Material | |
|---|---|
| Base | PMMA |
| Components | Resin, mineral filler and hardener powder |
| Colour | approx. RAL 7015 slate grey |
| Material density | approx. 2.10 kg/litre |
| Maximum grain size | 1.8 mm |
| Strength | |
| Compressive strength | > 20 N/mm² |
| Flexural strength | > 15 N/mm² |
| Application | |
| Minimum application thickness | can be feather-edged down to grain size |
| Maximum application thickness | 100 mm |
| Processing temperature | down to minus 5 °C |
| Working time at 20 °C | approx. 10 minutes |
| Curing time at 20 °C | approx. 30 minutes |
| Opening to traffic | approx. 20–60 minutes (temperature-dependent) |
| Substrate | Firm, load-bearing, clean, dry. Remove dust, oil and loose particles. |
| Priming | Asphalt: not required. Concrete: prime with HAASPHALT®-PRIMER. |
| Tool cleaning | With nitro thinner or acetone before the material cures. |
| Delivery and storage | |
| Container | 18 kg complete set in a plastic bucket |
| Palletising | 24 containers of HAASPHALT® 18 kg = 432 kg net per pallet |
| Storage | Store in a dry, cool place, protected from direct sunlight. Always keep containers tightly closed. |
| Shelf life | at least 12 months from the date of manufacture (see bucket lid) |
Safety
For professional use only
Disposal
Construction chemicals from Austria.
HAASPHALT® is manufactured and distributed by ACH GmbH from Pörtschach am Wörthersee, Austria. As an Austrian specialty chemicals company, we develop and supply reactive resin systems based on epoxy, PMMA and polyurethane for the construction industry and mechanical engineering under the austrochem® brand.
With HAASPHALT®, we have put this expertise into a ready-to-use set that can be processed directly on site, without heavy machinery.
Our standard: the agreed quality, at the agreed time, in the agreed place.
Company from Austria
ACH GmbH, Pörtschach am Wörthersee, Carinthia
Reactive resin specialists
Epoxy, PMMA and polyurethane systems for construction and industry
Questions about application or ordering?
Write to us or give us a call. We look forward to your enquiry!
Moosburgerstrasse 96
9210 Pörtschach, Austria
+43 664 / 13 59 854
info@haasphalt.com
www.haasphalt.com